We spent many hours on research to finding tronxy 3d desktop printer, reading product features, product specifications for this guide. For those of you who wish to the best tronxy 3d desktop printer, you should not miss this article. tronxy 3d desktop printer coming in a variety of types but also different price range. The following is the top 10 tronxy 3d desktop printer by our suggestions
968 reviews analysed
1. Comgrow Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Power Supply 220x220x250mm
- REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
- RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
- SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
- WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, 12 months warranty, lifetime technical assistance and 24 hours professional customer service.
2. TRONXY New Upgraded 3D Printer XY-2 PRO Fast Assembly Quick Installation Auto Leveling Continuation Print Power Filament Sensor Full Color Touch Screen 255X255 X 260
- Single Cable Design—-Complete wiring installation in one step. Compared with the complicated messy cable, the single cable design is more safer and convenient.Print sze: 255*255 *260/10*10*10.2inch.
- Three Important Features——-1)Automatic Leveling, help avoid a lot leveling troubles.2)Resume Printing after Power Off.3)Filament run out detection, When the filament runs out or disconnected, the printer will automatically suspended to ensure the model can be smoothly printed
- 3.5inch Full Color Touch Screen—New experience, HD display, simple operation, convenient and quick.
- Three Steps Installation—-Quickly install the TRONXY XY-2 PRO printer in just 3 steps, suitable for beginners
- After-Sales Service—–TRONXY will offer lifetime technical support and give satisfactory response to you. For the jet lag or Chinese New Year holidays etc, we may not be able to respond to you in time during those special periods, but we can guarantee that we will reply to it within 24 hours under normal conditions. Please wait patiently, don’t rush to give us a bad review. Your trust will give us biggest motivation.
Positioning accuracy:X/Y0.0125mm, Z0.02mm
Connection method : USB interface.TF card
Nozzle size :0.2mm, 0.3mm, 0.4mm optional
Hot bed temperature: max 120 C
Materials support :PLA.ABS.HIPS.WOOD.PC.PVC
environmental temperature 8-40°C
print thickness：0.1mm-0.4mm optional
Machine materials: Aluminium and sheet metal
Slicing software :TRONXY slice
Machine weight : 8.5kg
File format STL.OBJ.DAE.AMF.G-Code
Packing weight : 11kg
Operate software: Repetier-Host. Cura
Packing size :495*460*220mm
Operate system :WinXP/Win7/MacOS
Machine size: 460*450*510mm
Power failure resume print :included
Display :3.5 inches full color touch screen
Auto level : included
Filament run-out detector: included
3. QIDI TECH 3D Printer, X-Pro 3D Printer with WiFi Function, Dual Extruder, High Precision Double Color Printing with ABS,PLA,TPU Filament,9.1×5.9×5.9 Inch
- QIDI TECH 3D printer, equipped with the latest dual extrusion technology, occupied the overall leading position in education, engineering, design and home/hobby printing.
- X-Pro 3D Printer Kit features conditional breakpoint printing and upgraded 4.3 inch touch screen, Smarter and easier operation.Mute printing.
- Durable and high temperature resistance 6mm aviation grade aluminum build platform, can be heated up to 120℃. Removable curved metal plate make it more convenient to remove the model after printing, which is widely appreciated by users.
- The QIDI TECH 3D Printer with metal platform support rod, which upgraded to 12mm, and also including upgraded parts like motor, main board, and mechanical structure, ensuring more stable printing.
- Backed by with One-to-one QIDI TECH service. If you have queries about 3D Printer, feel free to contact our exclusive and fast support service team, we’ll reply back to you within 24hours. Free one-year warranty is also guaranteed.
X – PRO is a new dual-extruder 3d printer developed according to user requirements, which is applicable to families, schools, 3d printing fans, makers and businesses. .
QIDI TECHNOLOGY 3D Printer X-pro
1 spool of 0.5kg PLA filament,1 spool of 0.5kg ABS filament, color randomly selected.
USB Pen Drive
Filament guide tube
Printing Technology:FDM (Fused Deposition Modeling)
Build Volume: 230 L X 150 W X 150 H mm
Layer Resolution: 100~500 microns
Positioning Precision: 11 microns on X and Y and 2.5 microns on Z
Filament Diameter: 1.75 mm
Nozzle Diameter: 0.4 mm
Frame & Body: Metal
Extruder Quantity: TWO
Product Weight: 23 Software: QIDI TECH Software
Operating Systems: Windows 7/ 8 / 10 , Mac OS X
Windows system computer :print via USB Pen Drive ,Ethernet .
Mac OS system computer :Only support print via USB Pen Drive
Voltage: 115V ~ 230 V
4. Comgrow Creality Ender 3 3D Printer Aluminum DIY with Resume Print 220x220x250mm
- Resume Print: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
- Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion
- V-Slot with POM wheels make it move noiseless, smoothly and durable.
- Safety protected power supply
- Only needs 5 minutes for hot bed to reach 110℃
- Strict Test: Strict testing for key components before delivery and life-time technical supports.
5. ANYCUBIC Mega-S New Upgrade 3D Printer with Extruder and Suspended Filament Rack + Free Test PLA Filament, Works with TPU/PLA/ABS
- ※ Works Out of the Box：3 steps to set up the printer with fix 8 screws within minutes not only to an expert user but also to beginner.
- ※ Updated Extruder： Taitan extruder with its solid filament drive and overall mechanical design compatible with most filaments, reduced the clogging risk and improve printing accuracy. You could easily adjust the extruder refer the adjusting angle logo.
- ※ Anycubic Ultrabase：Patented printing platform with excellent adhesion whilst printing and pop off like they were never attached to the bed once it cools down. We not only upgrade the platform plate but also improve quality of the wires that won’t be loose.
- ※ Filament Sensor & Large Built Volume：The sensor pause prints and set off an alarm when you run out of filament which saves time and cost , printing volume reach 8.27 x 8.27 x 8.07 inch
- ※ Technical Support: We provide one year after-sale service for printer and lifetime technical assistance and 24H response. There also has a growing user community to sharing their successes and trials on Facebook, Reddit, and Youtube, which very helpful to beginners even seasoned users. Warning: Please download the latest firmware on ANYCUBIC official website for thermal protection.
6. 3D Printer, LABISTS Mini Desktop 3D Printer DIY kit for Beginners Kids Teens with 10M 1.75mm PLA Filament, Magnetic Removable Plate, Printing Size 100 x 100 x 100mm
- 【Great Mini 3D Printer DIY Kit】LABISTS mini 3D printer with 100x100x100 mm printing size, 1.75mm PLA Filament and accuracy of 0.05mm offers smooth and alive printing quality, a perfect DIY kit for beginners, kids, teens to DIY projects like toys, artworks, crafts or samples.
- 【Fast Heating Mini 3D Printer】The 0.4mm nozzle of LABISTS mini X1 Desktop 3D printer DIY kit reaches its operating temperature (180℃) in just 3 minutes. A high-quality power supply below 30W makes it super energy-saving and safe to use.
- 【Quick Assembly】LABISTS mini 3D printer DIY kit consists of 3 main parts and can be assembled in just 5 minutes according to the assembly video. Note: If an axis of the printer cannot be moved, please check whether the connecting cable is loose.
- 【Ultra-Silent Printing】With a silent working mode under 60db, LABISTS mini X1 Desktop 3D printer DIY kit never makes you feel irritable while you are sleeping or working.
- 【Easy to Use】LABISTS mini X1 Desktop 3D printer DIY kit comes with a unique button system that allows you to start, stop and easily control the printing process, suitable for beginners, kids, teens.
7. Monoprice Select Mini 3D Printer V2 – Black with Heated (120 x 120 x 120 mm) Build Plate, Fully Assembled + Free Sample PLA Filament and MicroSD Card Preloaded with Printable 3D Models
- All Filament Types: The heated build plate and wide range of extruder temperatures allow this printer to work with any type of filament, from basic filaments, such as ABS and PLA, to more advanced materials, such as conductive PLA, wood and metal composites, or dissolvable PVA
- Compact Desktop Design: Featuring a small footprint and basic, open frame design, this 3D printer is compact enough for any desk.
- Ready to Print: Unlike most other low-cost 3D printers, this printer ships fully assembled and has already been calibrated at the factory.
- We even include a MicroSDTM card with preinstalled models, so you can start printing right out of the box!
- KINDLY REFER USER MANUAL BEFORE USE | For Support, Quality Assurance, and Technical Assistance Live chat available Mon through Fri 6am – 6pm PS, E-mail [email protected] or give us a call at (877) 271- 2592.
MP Select Mini 3D Printer Too often, getting a low-cost 3D printer means getting a box of ill-fitted parts with poorly written and incomplete documentation. You end up spending hours on the internet, searching forums and asking for help to get the printer assembled and operating properly. That isn’t how Monoprice operates and this 3D printer is a perfect example! This printer not only comes fully assembled, it has already been calibrated at the factory. All you have to do is perform a quick check to verify that the print bed is still leveled, in case it shifted during shipping, then load the included MicroSDTM card, load some filament, and start printing the preloaded model. Nowhere else will you find a 3D printer ready to print out of the box at such a low price! Affordable 3D printing for everyone All Filament Types: The heated build plate and wide range of extruder temperatures allow this printer to work with any type of filament, from basic filaments, such as ABS and PLA, to more advanced materials, such as conductive PLA, wood and metal composites, or dissolvable PVA. Compact Desktop Design: Featuring a small footprint and basic, open frame design, this 3D printer is compact enough for any desk. Ready to Print: Unlike most other low-cost 3D printers, this printer ships fully assembled and has already been calibrated at the factory. We even include a MicroSDTM card with preinstalled models, so you can start printing right out of the box! Features Factory Calibrated Heated aluminum build plate nozzle cooling fan for printing all filament types Quick-release steel gear filament feeder Easy to use color LCD 0.4mm extruder diameter Complete kit with bed scraper, and MicroSDTM card with preloaded model files Micro USB and MicroSD card connectivity PC and Mac compatible Compatible with Cura, Repetier, and other
8. Official Creality Ender 3 Pro 3D Printer with Magnetic Build Surface Plate and UL Certified Power Supply Metal DIY Printers 220x220x250MM
- FAST HEATING & RESUME PRINT： The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
- PRINTING STABILITY： Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly
- REMOVE EASILY:Our all new magnetic bed surface for easy model removal is included stock on the Ender 3 Pro. Easily remove the magnetic print surface from the hotbed and remove models with no spatula or razor necessary.
- BRAND POWER SUPPLY:The brand power supply delivers more power with a stable output ensuring the temperature fluctuations are minimized, especially during long and intensive prints. Heat the hotbed faster and to higher temperatures before making the Ender 3 Pro a much better option for printing ABS and other high temperature high strength filaments.
- OFFICIAL CREALITY 3D AMAZON STORE. All of our products come with a 18 Months limited replacement part and lifetime technical support.We provide original part for after sale.more than 20 engineers provide professional customer service.
9. FlashForge Finder 3D Printers with Cloud, Wi-Fi, USB cable and Flash drive connectivity
- Slide-in build plate allows printed objects to be easily removed
- 3.5-Inch full color touchscreen with intuitive icons makes for easy operation
- Sturdy, plastic alloy construction ensures stable prints
- Safe, non-heated build plate
- Wi-Fi, USB, flash drive and Cloud connectivity.Printing material: PLA only.
FlashForge is improving and doing the updates from time to time. To make sure you have the best experience with the 3d printer, please ALWAYS UPDATE FIRMWARE TO LATEST VERSION. You can do firmware update on the printer quickly. Here are the steps:
1. Turn on the printer and go to touch screen menu “Tools—Setting–WiFi”.
2. Enable WiFi by slipping the icon at top right corner. Printer will scan available wireless networks.
3. Select your own network and enter password to connect.
4. After successful WiFi connection, go to touch screen menu “Tools—Setting—Update” to update firmware to latest version.
If you need video instruction, please contact me and I will send you the link.
Meet the new kid on the block. the user-friendly, home-friendly, and wallet-friendly 3D printer from FlashForge is ready to play. Loaded with easy-to-use features, and designed to be at home in kids rooms and classrooms, the new FlashForge Finder is the first choice for 3D printing novices and educators. Beginners benefit from the slide-in build plate, assisted bed-leveling, and intuitive color touchscreen. And parents and teachers appreciate its quiet and safe operation. The Finder uses only non-toxic PLA, and the heated components are safely encased. The creative world of 3D printing awaits, and the FlashForge Finder is here to show you the way.
What’s in the box?
Quick start guide
After-sales service card
Filament guide tube
Tool bag(Contains 2×Allen wrench, Wrench, Screwdriver, Unclogging pin tool, PTFE tube, Grease)
Finder 3D Printer
1 roll of 300g PLA filament, color randomly selected
Printing technology- FFF (Fused Filament Fabrication)
Build volume: 140 L x 140 W x 140 H mm
Layer resolution: 100-400 microns, adjustable
Positioning precision: 11 microns on x and Y and 2.5 microns on Z Filament diameter: 1.75 mm
Nozzle diameter: 0.4 mm
Frame and body: plastic and alloy
Extruder quantity: one
Product dimension: 420 x 420 x 420 mm
Product weight: 16 kg
Software: FlashPrint(No USB stick is included in the package, users need to download from FlashForge official website http://www.flashforge.com/support-center/finder/)
File Type: STL, obj
Operating systems: Windows 7/8/8.1/10, Mac OS x and Linux
Printing via Wi-Fi, USB cable，USB stick and Cloud
Language support: English/Chinese
Printing material: PLA only.
Support Contact Information
If you encounter any issues with your FlashForge purchase or have any questions, please contact the expert support team at [email protected]
10. TRONXY X5SA Large-Size DIY kit high-Precision Industrial-Grade Home 3D Printer, Silent Pulley, Material Break Detection, one-Key Leveling Automatic Leveler, bidirectional Fan
- 1. [New high-definition 3.5-inch touch screen] is easy to operate and easier to use. Remote extruder — MK8 nozzle with elaborate design, high printing accuracy and more stable printing performance. Single cable design — Solve many lines, chaotic lines, easier to operate.
- 2. [Filament run out detection] When the consumables are almost used up, a prompt sound will be issued to maintain the use of consumables in time, which improves the printing efficiency. Automatic leveling — one-key leveling, quick work. Save printing time.
- 3. [More functions] Two-way cooling design — cooling fan + cooling fan, improve the cooling efficiency. Wiring motherboard box — saves time for wiring installation, more safe and reliable. Selected high wear-resistant pulleys — improve printing speed and service life.
- 4. [For experienced printer enthusiasts] The TRONXY X5 series 3D printer is a DIY assembly machine. Not suitable for beginners who want to print directly in a short time. Of course, if you are a DIY enthusiast or a beginner who is willing to spend a lot of time assembling and learning 3D printing, you can also choose to buy.
- 5.[After-sales service]If you encounter any problems when installing and using the 3D printer, please read the manual and contact TRONXY’s professional after-sales personnel. (contact us: Your Amazon Buyer Account> Click Your Account> Your Orders> Find your order and click Contact Seller)It has a one-year warranty.Our TRONXY will provide lifetime technical support and will give you a satisfactory answer. We guarantee that under normal circumstances we will reply within 24 hours.
By our suggestions above, we hope that you can found Tronxy 3D Desktop Printer for you.Please don’t forget to share your experience by comment in this post. Thank you!