Top 10 Ice Maker Recirculation Pump

0

Finding your suitable readers for ice maker recirculation pump is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for ice maker recirculation pump including detail information and customer reviews. Let’s find out which is your favorite one.

775 reviews analysed

1. Watts 500800 Instant Hot Water Recirculating System with Built-In Timer, Easy to Install

Watts 500800 Instant Hot Water Recirculating System with Built-In Timer, Easy to Install

Feature

Description

Product Description

Specification:

  • Voltage: 120 volts
  • Item Weight: 8.5 pounds
  • Overall Dimension: 6.2 x 6 x 5 inches
  • Size: Full
  • Color: Blue
  • Material: Case
  • Warranty: 1 Year

Never wait for hot water again! The Watts Hot Water Recirculating Pump provides hot water at every faucet or shower when needed, eliminating wasted water. It is easy to install on any water system and requires no additional piping. The unique design of the pump ensures quiet, maintenance-free operation. The system includes a built-in 24 hour, a dual setting programmable timer to activate the pump only when needed. System that provides instant hot water to every faucet or shower in a home when you need it. Stop throwing money down the drain and waiting for your hot water.

From the Manufacturer

The Watts Premier hot water recirculation pump puts hot water at every tap when you want it. Saves up to 15,000 gallons per year. The pump brings convenience and savings to your home, giving you hot water instantly at every faucet, when you need it. This unique product is easy to install and not only provides you with the convenience of hot water when you need it, but saves an average of over 11,000 gallons per year. *May not work with a tankless water heater.

2. Grundfos 98420224 10-16 A PM BU/LC Comfort PM AutoAdapt Recirculation Pump

Grundfos 98420224 10-16 A PM BU/LC Comfort PM AutoAdapt Recirculation Pump

Feature

Description

The high-efficiency Grundfos Comfort PM range is a product for domestic hotwater re-circulation with lead free drinking water suitable pump housing for single- and two-family houses powered by a high efficiency single-phase, 12-pole, permanent-magnet motor. The AUTOADAPT function has been developed for domestic hot-water systems with hot-water tanks as primary heating source. In domestic hot-water systems with integrated temperature control functionality for raising and lowering the temperature on the recirculation pipe, Grundfos recommends using the COMFORT BX or COMFORT B models. To get the full advantages of the COMFORT AUTO model with the AUTOADAPT feature, Grundfos recommends installing the pump in systems with hot water storage tanks.

3. Grundfos GRU-595916 595916

Grundfos GRU-595916 595916

Feature

Description

Product Description

Up1510su7ptlc features: -Recirculator pump kit.-Material: Bronze and stainless steel.-Aluminum stator housing.-Stainless steel spherical separator.-Stainless steel / tungsten carbide rotor.-Stainless steel, epdm, pu, ptfe, graphite rotor and impeller.-Brass ms 58 pump housing.-Ppo isolation valve.-Pa66/6 terminal box cover, motor cover.-Lexan light.-Pvc cable, cable relief.-Epp 55 insulating cover.-Epdm o’rings.-Pom check valve.-Proud to bring the comfort and savings of hot water recirculation to the existing homes market with the comfort series instant hot water system.-Stainless steel circulator, complete with timer and 10-foot power cord, is installed directly to the hot water discharge on the water heater.-Comfort valve is installed under the sink at the fixture furthest from the water heater, and the system uses the existing cold water line to return hot water to the water heater.-Circulator pumps, series up, are specifically designed for heating systems.-Suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems.-Wet rotor design.-Composite impeller.-Eliminates and prevents corrosive effects of fresh water.-Maintenance-free, low energy consumption, easy to install, quiet running.-Improved performance and efficiency.-Pre-program usage times to save power.-No additional wiring required.-Adds to savings by operating pump by sensing the water temperature.-Insulation class: F.-Flow range: 0 – 65 us gpm.-Head range: 0” – 72”.-Maximum fluid temperature: 150 f (66 c).-Minimum fluid temperature: 36 f (2 c).-Maximum working pressure: 145 psi.-Connection: 075” m x 075” fnpt.-Tlc : Timer, line cord. Includes: -Includes timer and line cord.-Comfort system includes a up15-10su7/tlc circulator and the revolutionary comfort valve. Specifications: -Up15-10su7p/tlc comfort series 1/25 hp recirculator.-Recirculator engine: 1/25 hp.-Power consumption: 25watts.-Motors: Voltage: 115volts, phase: 1. Dimensions: -Dimension.

From the Manufacturer

The Grundfos UP15-10SU7P/TLC Comfort Series 1/25 HP Recirculator Pump is a Comfort Series Instant Hot Water System. Includes timer and line cord. Grundfos Pumps is proud to bring the comfort and savings of hot water recirculation to the existing homes market with the Comfort Series Instant Hot Water System. The Comfort System includes a Grundfos UP15-10SU7/TLC circulator and the revolutionary Comfort Valve. The stainless steel circulator, complete with timer and 10-foot power cord, is installed directly to the hot water discharge on the water heater. The Comfort Valve is installed under the sink at the fixture furthest from the water heater, and the system uses the existing cold water line to return hot water to the water heater. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems.

4. Trupow 3/4" NPT 110V Hot Water 3-Speed Circulation Pump Circulator Pump

Trupow 3/4" NPT 110V Hot Water 3-Speed Circulation Pump Circulator Pump

Feature

5. EXTRAUP 3/4 NPT 110V Hot Water 3-Speed Cast Iron Circulation Pump Circulator Pump

EXTRAUP 3/4 NPT 110V Hot Water 3-Speed Cast Iron Circulation Pump Circulator Pump

Feature

Description

FEATURES:
1.Rated Power(W):100/67/46
2.Voltage/Frequency/110-120v/60HZ
3.Inlet/Outlet:3/4″
4.Max Flow: 30L/min
5.Max Head: 6.0m
6.Pump housing: Aluminum
7.Impeller: PP
8.Motor wire: Copper
9.Shaft: Ceramic
10.Bearing: China
11.Liquid temperature range: 0℉ -+212℉

Application:
Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment.

PACKAGE CONTENT:
1x circulation pump
2x copper connector; 2x copper nut; 2x rubber gasket
1x user manual

6. Laing LHB08100092 AutoCirc Recirculation Pump with Timer

Laing LHB08100092 AutoCirc Recirculation Pump with Timer

Feature

Description

Product Description

The auto circ pump is installed under the sink or faucet farthest from the water heater – where hot water usually takes the longest amount of time to arrive. A built-in temperature sensor automatically turns the autocirc pump on when the water temperature in the hot water supply line cools down to 85º F. This cool water in the hot water supply line is then pumped into the cold water line and back into the water heater. The autocirc pump turns off automatically when the hot water supply line to the faucet reaches a temperature of 95º F, ensuring the instant availability of shower warm water with maximum temperature hot water only seconds behind. When the pump is automatically turned off by the built-in thermostat, an auto closure device prevents hot or cold water from mixing in either supply line. Another beneficial feature is that hot water will also be instantly available at all other faucets in the supply line between the water heater and the faucet where the autocirc pump is installed. Does not require a return line. Requires only 14 watts of power. Packaged complete with a 6 ft. long power cord. Requires only one pump and one installation for all fixtures on the hot water plumbing line. Has built-in fixed thermostat. Has a built-in 24 hour timer which allows the selection of system operating periods to suit family usage. Saves the average family of four up to 17,000 gallons of water annually.. Long lasting, silent operation. Saves energy, money, water and pays for itself in a short period of time (see additional images for energy saving chart). No shaft, no seal. Maintenance free without blockage. Single bearing design. Resistant to scale build up.

From the Manufacturer

The Laing Pump is installed under the sink or faucet farthest from the water heater – where hot water usually takes the longest amount of time to arrive. A built-in temperature sensor automatically turns the pump on when the water temperature in the hot water supply line cools down to 77º F. This cool water in the hot water supply line is then pumped into the cold water line and back into the water heater. The Laing pump turns off automatically when the hot water supply line to the faucet reaches 91º F, ensuring the instant availability of shower warm water with maximum temperature hot water only seconds behind. When the pump is automatically turned off by the built-in thermostat, an auto closure device prevents hot or cold water from mixing in either supply line.The product should be installed by a licensed professional.

7. bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM

bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM

Feature

Description

It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise

Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler

Circulation pump is non-self-priming pump (0 Suction Height).
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI). This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure.
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉

Please note: If you use this pump for circulating wort it should be cleaned out after using it.

Item included:
1x DC 12V Solar Hot Water Circulation Pump
1x AC 110V- 240V to DC 12V 2A Power Supply Adapter

8. Little Giant VCMX-20ULST 554550 VCMX Series Automatic Condensate Removal Pump With Safety Switch (115 volts), 1/30 horsepower

Little Giant VCMX-20ULST 554550 VCMX Series Automatic Condensate Removal Pump With Safety Switch (115 volts), 1/30 horsepower

Feature

Description

Size:Pack of 1

Product description

Little Giant VCMX-20ULST (554550) Automatic Condensate Removal Pump includes 20ft of 3/8″ Tubing and Safety Switch, which gives the option to connect air-handler shutdown or activate an alarm or building automation system. Little Giant condensate pumps VCMX (X Next Generation) offer greater head capacities than the VCMA Series. These Little Giant Pumps feature Slimmer Footprint (4.8″ x 10.2″ x 6.5″ size), Oil Resistant Tank, Check Valve, 6′ power cord, Thermal overload protection and many others. Specs: * Model Number: VCMX-20ULST; * Horsepower: 1/30; * Tank: Medium; * Flow: 84 GPH @ 1′; * Cord Length: 6′; * Shut Off: 21′; * Voltage: 115; * Hertz: 60; * Amps: 1.5; * Watts: 93; * Weight: 6 lbs.; * Height: 6.5″; * Widht: 4.8″; * Length: 10.2″; * Certification: cCSAus;

From the Manufacturer

Little Giant’s latest technology, VCMX Series is ideal for collecting, detecting, and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required. The VCMX-20ULST features a 1/30 HP high performance motor with patent-pending cooling design to increases pump life. The oil-resistant tank and check valve eliminates the problem of cracked tanks with exposure to oil. The pump also features a 1/4 turn check valve which allows servicing without removal of tubing. This feature helps to eliminate water spills. This pump includes a mounting bracket for easy installation, a safety switch, a 6 foot power cord, and 20 feet of tubing. The pump’s rubber feet absorb vibration on hard surface installations and its slimmer footprint size offers flexibility in tight spaces. The VCMX-20ULST pumps 84 GPH at a discharge head of one foot.

9. Little Giant 554435 VCMA-20ULST-115 Condensate Removal Pump, 115V

Little Giant 554435 VCMA-20ULST-115 Condensate Removal Pump, 115V

Feature

Description

Product Description

Little Giant VCMA Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required. Designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.

From the Manufacturer

Little Giant VCMA Series is ideal for collecting, detecting, and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required. Designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.

10. Trupow 120W 3/4" NPT 110V Hot Water Automatic Circulation Pump Cast Iron Circulator Pump

Trupow 120W 3/4" NPT 110V Hot Water Automatic Circulation Pump Cast Iron Circulator Pump

Feature

Conclusion

By our suggestions above, we hope that you can found Ice Maker Recirculation Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general