Top 10 12 Hp Water Pump 94U105
Finding your suitable readers for 1/2 hp water pump 94u105 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 1/2 hp water pump 94u105 including detail information and customer reviews. Let’s find out which is your favorite one.
871 reviews analysed
1. Liberty Pumps 331 Portable Transfer Pump, one-size, RED
331 Features: -Pump.-Perfect for boosting water pressure, draining hot water tanks and general water transfer.-Not intended for permanent installations.-0.75” Brass garden hose connectors.-Glass reinforced thermoplastic impeller.-Large prime plug with internal funnel design easy priming.-Easily replaced motor brushes.-Maximum suction lift of 180”.-Thermally protected.-Engine HP: 1/2.-RPM: 7500.-Power cord: 240”.-Maximum fluid temperature: 135 F. Color/Finish: -Durable epoxy powder coat finish. Specifications: -Include: One-piece cast aluminum pump and motor housing with integral carry handle, permanently lubricated bearings, convenient on / off switch, powerful 0.5 hp motor capable of pumping to over 1200” of head.-115 Volts / 60 Hz / 8 Amps motor. Dimensions: -Dimensions: 7” H x 4.5” W x 9.75” D. Warranty: -2-Year warranty.
From the Manufacturer
This portable pump is perfect for boosting water pressure, draining hot water tanks and general water transfer. Features include a one-piece cast aluminum pump and motor housing with integral carry handle, permanently lubricated bearings, a convenient On/Off switch, and a powerful 1/2hp motor capable of pumping to over 100-Feet of head. Not intended for permanent installations. This pump delivers up to 40-Pound of pressure, has a maximum discharge head of 105-Feet , and a maximum vertical suction lift of 15-Feet.
2. Champion 2-Inch Gas-Powered Semi-Trash Water Transfer Pump with Hose and Wheel Kit
- Complete Setup – Everything you need to start pumping – 12-foot intake hose, 20-foot discharge hose, cam action quick coupler, intake strainer, clamps, fittings and adapters (just add oil and gas)
- Efficient – 158 gallons per minute maximum delivery powered by a 196cc Champion engine with a 0.9-gallon fuel tank and 0.6-quart oil capacity
- Semi-Trash – Capable of passing solid waste up to 9/16 inch in diameter, this pump has a 2-inch inlet, a 2-inch outlet, total head of 98 feet and suction head of 26 feet
- Convenient – Featuring a durable steel frame, handle and wheel kit with never-flat tires, this pump is easy to move from one job to the next and a cinch to store
- Champion Support – Includes 2-year limited warranty with FREE lifetime technical support from dedicated experts.Impeller Material:Aluminum
3. Multiquip ST2037 Centrifugal Single Phase Electric Submersible Pump, 37-Feet Head, 73 GPM, 2-Inch Discharge
The ST2037 incorporates a rugged cast aluminum housing, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller and molded 25′ power cable with strain relief. This is a powerful versatile, low maintenance pump that is perfect for a wide range of operations supporting contractors, service utilities, Municipalities and homeowners. Built-in thermal overload protection that shuts down the pump when operating temperature becomes too high and automatically restarts once the motor cools and a proper temperature is met. The ST series single phase pumps are in accordance with ISO9001 quality management system standard. Also, all single phase models carry the UL listing for compliance with both US or Canadian electrical safety codes. The ST series single phase pumps are in accordance with ISO9001 quality management system standard. Also, all single phase models carry the UL listing for compliance with both US or Canadian electrical safety codes.
4. Tsurumi HS2.4S; semi-Vortex Submersible Trash Pump w/Agitator, 1/2hp, 115V, 2" Discharge
5. Liberty Pumps SJ10 1-1/2-Inch Discharge SumpJet Water Powered Back-Up Pump
- At an inlet water source pressure of 60 PSI and a head length of 4-Foot this model pumps 19.8 GPM
- Accepts 20PSI up to 100PSI inlet supply pressure
- 3/4-Inch NPT water inlet connection accepts pex, copper or CTS CPVC 3/4-Inch line
- UPC approved (IAPMO PS 119-2005)
- Built-in screen with removable-Foot valve
SJ10 Features: -Pump system.-With a compact high efficiency design, removes 2 gallons of sump water per 1 gallon used.-Protect basement in the case of a power outage.-Powered by your municipal water supply and requires no electricity to operate.-Fully automatic, arrives completely assembled, and comes backed.-Pumping performance varies with inlet water source pressure and pumping head.-Requires an uninterrupted water source to operate.-Accepts 20 PSI up to 100 PSI inlet supply pressure.-High-output flow rates.-Works off municipal water supply.-UPC approved.-Adjustable stainless hose clamp for easy mounting.-Built-in screen with removable foot valve.-Built-in check valve at water inlet.-Additional backflow protection is required.-Discharge: 1 1/2”.-Water inlet connection: 0.75” NPT.-Maximum fluid temperature: 130 F. Construction: -Constructed of durable PVC. Dimensions: -Dimensions: 21.6” H x 5.1” W x 14.5” D. Warranty: -2-Year warranty.
From the Manufacturer
The SumpJet (Model SJ10) is a water powered back-up sump pump that will protect your basement in the case of a power outage. This unique product is powered by your municipal water supply and requires no electricity to operate. With a compact high efficiency design, the SumpJet removes 2-Gallon of sump water per 1-Gallon used (based on 5-Foot lift). The SumpJet is fully automatic, arrives completely assembled, and comes backed with Liberty’s standard 2 year warranty. The SJ10 requires an uninterrupted water source to operate.
6. WAYNE PC4 1/2 HP Cast Iron Multi-Purpose Pump With Suction Strainer
- The product is manufactured in China.Generates up to 50 PSI at outlet hose
- generates up to 15 ft. of suction lift at inlet hose
- The product is highly durable and easy to use
- Easy installation and easy handling
- 1/2 HP transfer water pump can be used to increase line pressure up by up to 40 PSI
- Use to pump out flooded basements, tanks, or boats
- Made from durable cast iron steel
- Connects to garden hose with 3/4-inch brass hose connections
- 1-year limited warranty
1/2 HP, Cast Iron, Portable Utility Pump, Pumps Up To 1450 GPH at 0′, Portable Cast Iron Transfer Utility Pump, High Performance 1/2 HP, Motor Boosts Line Pressure Up To 40 PSI, 3/4″ Brass Hose Adapters Connect To Standard Garden Hose, Portable Transfer Pump, You Can Take Anywhere & Plug In, Easy Prime Priming Outlet, Applications Include Drainage, Dewatering Flooded Basements, Emptying Stock Tanks, Draining Water Heaters, Charging Polyglycol Radiant Heating Lines, Easy Carry Cast Iron Handle For Portability, Reinforced Thermoplastic Suction Strainer Included. The product is manufactured in China. Easy installation and easy handling.
The Wayne 1/2 HP 115-volt transfer water pump can pump water out of flooded basements, tanks, or boats. It can also increase line pressure by up to 40 pounds or be used to water lawns and gardens, and can even be used to wash cars and sidewalks. It’s made from durable cast iron steel. The included suction strainer keeps out extraneous material, and the 3/4-inch brass hose connections resist stripping while easily connecting to garden hoses. A top-threaded priming port is easily filled, and the ball bearings have lifetime lubrication. Wayne backs its pump with a one-year limited warranty.
7. Hallmark Industries MA0419X-12A Deep Well Submersible Pump, 2 hp, 230V, 60 Hz, 35 GPM, 400′ Head, Stainless Steel, 4"
4″ deep well submersible pump. 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge Industrial grade heavy duty, also good for home usage
* Fits a 5″ or larger well casing.
* Patented impeller & 12 stage design. 35GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity.
* Unique floating impeller design, premium seal, and UL qualified motor provide long life for this pump.
* Water temperature: (32 ~113of) Trans medium’s Ph.: 6.5~ 8.5
* Shell, motor shaft are made with stainless steel to ensure corrosion resistance.
* High quality sealed ball bearings guarantee its excellent performance.
* Built in check valve included. Installing external check valve(s) is required.
* Hermetically sealed motor with capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, for less energy and long pump life.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire) 10′ long electric cord included.
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* Unique design reduces its noise. User’s manual and installation tape kit included.
* 400 feet max head is for open water tanks. Refer to the ‘Pump Selection Guide’ for the pressure tank applications.
* Warranty: 12 months manufacturer’s warranty
8. FLUENTPOWER 1 HP Portable Stainless Steel Lawn Sprinkling Pump with 1" NPT Female Thread for Garden Irrigation and Pressure booster
- 【Garden Sprinkler Pump】- With stainless housing and waterproof on/off switch, easy carry handle for portability and storage
- 【1HP High Power High Efficiency】- The pump has maximum flow rate of 845 gallons per hour, Maximum Lift head up to 144ft and Max suction depth 8m
- provides the necessary power to booster water pressure and connects to sprinklers
- 【Pure Copper Motor with Thermal Protection】- Pure copper motor can bring better and more lasting work to the pump, overheat protection ensures that the pump will not be burned out.
- 【Idea Use For】Pump is designed to work only with CLEAN WATER, Sutiable for ponds, pools, sprinkling systems, flow irrigation systems, gardening, rain barrels, large aquariums, use in agriculture settings, shallow and water wells. The pump is also compatible with a pressure regulator and work as a booster pump.
- 【12 Month Warranty】The pump has 1″ NPT female thread and is easy to set up with 1″ hose or adapter.
9. SEAFLO 33-Series Industrial Water Pressure Pump w/Power Plug for Wall Outlet – 115VAC, 3.3 GPM, 45 PSI
SEAFLO’s SFDPA1-033-045-33 has an incredible feature list, high quality components, and amazing performance. UL 778 & CSA 22.2 Certified. The three-chamber high volume design, driven by a heavy-duty motor produces flow rates of 3.3 GPM. It is capable of self-priming up to 6 vertical feet and can run dry making it the price to performance leader. Everything in pictures is included such as a 51S01 Filter – 1/2 NPSM Inlet/Outlet and a 51F01 Fitting – 1/2 FNPSM x 1/2 Barb. This pump also features an electrical cord which can connect directly to any standard US outlet making installation easy and simple. The 115VAC 33-Series can be used in a variety of applications and industries such as marine, boat, RV, industrial, and janitorial thanks to its versatility.
BRAND NEW SEAFLO SFDPA1-033-045-33 Industrial Water Pressure Pump
Sleek finish in Orange and White SEAFLO colors
UL 778 & CSA 22.2 Certified
Plugs into your standard wall outlet for ease of use
Self-priming up to 6 vertical feet
Features an automatic pressure switch that can be adjusted
Built-in check valve
Capable of run dry operation
Suitable for food grade applications
**For best results, please use supplied fittings. If using metal fittings, use caution when tightening**
Flow Capacity: 3.3 GPM
Amperage Draw: 0.75 A (MAX 1.2 A)
Inlet/Outlet: 1/2″ Threaded MNPT
Dimensions: Approx. 7.98″ x 5.11″ x 4.84″
10. WAYNE PLS100 1 HP Portable Stainless Steel Lawn Sprinkling Pump
- 1 hp
- max. Flow rate is 720 gallons per hour
- 520 gph at 10 ft. Of discharge lift
- Portable stainless steel with safe and convenient on/off switch and easy carry handle for portability
- Fan cooled continuous-duty 115 volt motor draws water up to 20 ft.
- 1 in. Npt suction and discharge threads, 3/4 in. Garden hose adapter included
- 180 ft. Of total dynamic head, maintains pressure up to 80 psi,Durable corrosion resistant construction.
- Multi-purpose 1 HP pump
- Generates suction lift up to 20 feet
- Made from rugged stainless steel
- Pumps up to 720 gallons per hour
- 1-year limited warranty
Wayne PLS100 1 hp portable stainless steel water sprinkling pump. 1 hp; max. Flow rate is 720 gallons per hour; 520 gph at 10 ft. Of discharge lift. Portable stainless steel with safe and convenient on/off switch and easy carry handle for portability. Fan cooled continuous-duty 115 volt motor draws water up to 20 ft. 1 in. Npt suction and discharge threads, 3/4 in. Garden hose adapter included. 180 ft. Of total dynamic head, maintains pressure up to 80 psi. Durable corrosion resistant construction. Lift water as high as 25 ft. And discharge pressures from 35 to 50 psi.
The Wayne 1 HP 720 GPH portable lawn sprinkling pump is designed to draw water from ponds and rivers to sprinkle lawns or gardens, clear standing water, and empty or fill tanks. It’s made from durable stainless steel that holds up to wear and has threads that won’t strip. The pump generates suction lift of up to 20 feet, with a maximum discharge head of 180 feet and 720 gallon per hour maximum flow rating. The automatic thermal protection prevents overheating if small extension cords are used to power the pump, and a garden hose adapter makes start-up simple. You should use this pump with the highest amp-rated cord possible for optimum performance. Wayne backs its pump with a one-year limited warranty.
By our suggestions above, we hope that you can found 12 Hp Water Pump 94U105 for you.Please don’t forget to share your experience by comment in this post. Thank you!